Total Pageviews

Sunday, May 15, 2011

George Lawrence Saddle Collection

UPDATE - 5/18l11  I added a link to a youtube video about the George Lawrence Company at the bottom of the post.


Nice day yesterday..., don't anyone tell Julie that I was working on saddles..., and The Blog..., instead of doing my chores !!!  You can click on these thumbnail photos and view them in a larger format.



Just don't understand WHY those horses would turn thier backs on these fine George Lawrence saddles?


From left to right..., newest to the oldest by age.




This tan saddle is the only one that has the most recent George Lawrence logo stamped on the back of the cantle.


This is what I call the Third Generation Logo..., or "script logo".  This is the only saddle I have or have seen with this logo.



That's Smokey..., with his saddle blanket on..., sitting in front of Julie's saddle.  He likes the rawhide accents added to the horn and gullet..., nice..., but not original.


"Jackson" is easily the oldest..., the first give-a-way is it is an "8-string" saddle.  Newer saddles are "6-string".  Also the square skirts and extremely "high back" cantle.  I also believe that it was an old "bear trap" design.  The rolls have been repaired and it looks to me like they may have been cut down.


I call this the First Generation Logo..., I have only seen it on the really old saddles.



Second from right is a newer design..., with a Cheyenne roll on the low back cantle, small, low rolls and what the GLC described in their catalog as a "pelican horn".  We used to call those big horns a  "Mexican roping horn" when I was a kid.


This is what I call the Second Generation Logo..., it is on all the saddles..., with the exception of "Jackson" and the tan saddle.  My research has not found any means of dating the use of the three different logos.



Second and third from left are Julie and I's saddles.  Notice the swept back rolls..., not as exagerated as the old "bear trap" design..., they were referred to as a "form fitter" design.  Not sure if George Lawrence or Hamley was the first to use that design.  My saddle is easily dated by the "wool lining" instead of the standard "sheep skin" lining that is commonly used.  During WW II sheep skin was in short supply because it was being used by the military for "boomer jackets".

Here's a link to a youtube video about saddles and the George Lawrence Company.

http://www.youtube.com/watch?v=c-G8sH2JxnM

49 comments:

  1. I have a Lawrence saddle with a high back. The logo is like the picture of yours that says First Generation Logo. Is there any way to narrow down the age of the saddle? Thanks Ron

    ReplyDelete
  2. Hi Ron..., I don't have any definitive knowledge of when the Second Generation logo came into being. I am guessing the 20' or 30's. A loop seat and slick fork design like the one pictured on "A Couple of Real Beauties on Ebay" would indicate the it is late 1800's or very early 1900's.

    ReplyDelete
  3. Hi Scott, I have a Lawrence saddle exactly the same as the 3rd from the left. Do you know the age or value of that saddle? Attempting to sell it and I'm not sure where to start. Thanks, Shannon

    ReplyDelete
  4. Sorry, it's the 3rd from the left if you're looking from behind, and 3rd from the right if looking from the front.

    ReplyDelete
    Replies
    1. Hi Shannon. That saddle is from the early 40's. It's age is given away by the "wool" lining that is used instead of the "sheepskin" lining that is the standard on saddles. During WW II all the sheepskin available was being used to make "bomber jackets". But the design of the saddle..., called a "form fitter"..., with it's slightly swept back rolls was common for many years. Hamley also made saddles with a form fitter design. I haven't been able to acquire..., or view enough of the G.L. Lawrence catalogs to determine specific dates of the various models and designs they used.

      As for prices..., it is really hard to say. I acquired over half of this collection from Ebay. Just type in "Lawrence saddle" in the search box and you will see three of them for sale now. The asking prices range from $650 to $600 to $485. I checked the "completed" auctions and only one has been sold recently..., for $400. I have paid anywhere from $75 (a nothing special at a garage sale that isn't even displayed here) to $700 for one that I just had to have to send to my Dad for Christmas (third from left). I would think that your saddle if it is in good shape and near original should bring around $400..., maybe less. It isn't really old enough to be considered an antique..., and GLC made a lot of saddles in their day. I had always hoped that I could attend some of the bigger "cowboy and old west memorabilia" auctions with my Dad to see what value some of the collectors place on them. Sadly..., we never got the chance..., and since he passed away I really haven't been keeping up on the market for saddles. Hope this has been some help to you..., and thanks for viewing and commenting.

      Delete
  5. I have a GL saddle that has what you call the second generation logo. I've had it for almost 50 years and it was used when I got it. The tooling looks actually like the same tooling pattern as on the cantle picture you show with the second-generation logo on it.

    ReplyDelete
    Replies
    1. Thanks for the comment..., and for checking out the blog Anonymous.

      Delete
    2. We have a third generation script logo. Do you know the dates of production for that generation?

      Delete
    3. Thanks for the comment and for checking out the blog. I haven't been able to find out the exact dates of when the logos were changed. My best guess is that the third generation logo came into use some time in the late 40's or early 50's. I believe that GLC quit saddle production in the early 50's.

      Delete
  6. Scott Do you know if the G. L. Larwrance CO. made any saddles for the U.S. Cavalry. I have an old G.L. with a high candle and high small horn with brush guards marked U.S. It has the 2'nd gen. logo
    Thanks
    Jim L.

    ReplyDelete
    Replies
    1. If you watch the YouTube video, there were quite a few cavalry-type saddles pictured inside the factory. Of course I'm assuming the photos used in the video were all from the Lawrence factory.

      Delete
  7. Hey Jim..., thanks for checking out the blog and commenting. I doubt that Lawrence made saddles for the military. Here is a link to..., and quote from..., a Wiki post about the McClellen saddle.

    http://en.wikipedia.org/wiki/McClellan_saddle

    "The McClellan saddle was a riding saddle designed by George B. McClellan, a career Army officer in the U.S. Army, after his tour of Europe as the member of a military commission charged with studying the latest developments in engineer and cavalry forces including field equipment. Based on his observations, McClellan proposed a design that was adopted by the Army in 1859. The McClellan saddle was a success and continued in use in various forms until the US Army's last horse cavalry and horse artillery was dismounted in World War II. Today, the McClellan saddle is used by ceremonial mounted units in the US Army. The saddle was used by several other nations, including Rhodesia and Mexico, and to a degree by the British in the Boer War."

    So..., that doesn't mean that some officer might not have decided that he preferred a Lawrence to a McClellan and purchased his own. Patton's ivory handled pistols certainly were not standard military issue !!!!

    ReplyDelete
    Replies
    1. Scott
      Thanks for getting back so quick! I kinda thought that either someone added the guards down the line or that a officer had purchased it. The saddle has been in my barn for 10-20 years I forgot I had it! I learned to ride on an old McClellan a few years ago! Again thank you for the reply.

      Delete
  8. My has the script and is good condition. Just wondering about how much its worth?

    ReplyDelete
    Replies
    1. Hey Corbin..., thanks for checking out the blog and commenting. Prices on these old saddles aren't near what i paid for most of mine. I am not a very smart investor I guess. I just checked 'completed" auctions for "Lawrence Saddle" on Ebay..., not much interest in them now days. I got most of mine prior to the big financial meltdown in '08 and the saddles haven't recovered like the stock market has (wish the real "cowboy economy" would recover like that !). But..., I haven't seen many of the script logo saddles around..., so they are a lot rarer and may be a bit more valuable than those older models. I doubt if you could get much more that $400-500 for it though.

      Delete
  9. I have a George Lawrence Saddle with a "Second Generation" logo. It's in very good condition. It is similar to the far right one pictured above, but it does not have the flower stamping on the cantle. I am curious as to it's value. I believe it's from the 1890's to very early 1900's. Is there anyway to confirm the year it was made and its current value?

    ReplyDelete
    Replies
    1. You are probably a little early in you are a little early in your estimation..., I believe that the second generation logo started in the 20's or 30's. I think that the 1890's and early 1900's were the old "8 string" saddles and had the first generation logo. Prices are hard to determine..., check out "Lawrence Saddle" on Ebay to see what they are worth these days. I haven't been keeping up with them lately. Thanks for checking out the blog and commenting :)

      Delete
  10. Hi! I just received my great-grandfather's saddle, and it has what you refer to as the "first generation" logo. Do you know when abouts this was used? Thanks!

    ReplyDelete
    Replies
    1. Well..., my best guess was answered above, "I believe that the second generation logo started in the 20's or 30's. I think that the 1890's and early 1900's were the old "8 string" saddles and had the first generation logo."

      Thanks for checking out the Blog and commenting.

      Delete
  11. Hello and thank you very much for your George Lawrence saddle pictures. I love to look at old saddles. I had a question about my George Lawrence saddle. What would be your educated guess on the year it was made. It is an 8 string saddle, rounded skirt, old tie stirrup length adjustments, single rig cinch, ( no rigging or hole for rear cinch ) 2nd gen trade mark stamp, silver on top of the horn. Thank you for your time!

    ReplyDelete
  12. One other thing I noticed is that my saddle has leather straps hanging of both sides of the pommel with a buckle on the right side strap. From what I can see in your pictures I only see that on your oldest saddle.

    ReplyDelete
  13. A couple more questions Scott, sorry to keep adding to this but I keep thinking of more questions and I would love your input. Just out of curiosity have you ever heard of an 8 string with a second gen mark? Another question is do you know what style of stirrups they came with? Mine has wood ones with metal wrapped around the outside, I don't know if they are original or not. My last question is your tan saddle for sale? I know it's a very long shot but I had to try, I love the look of that saddle!! My friend has been doing some work at the George Lawrence building in Portland. I told him to look for any old history around there.

    ReplyDelete
    Replies
    1. Hey Dzirkle...., thanks for checking out the blog and commenting. I would love to see pictures of your saddle..., my email is scottr@olypen.com if you want to send me some. It looks like my earlier estimate in the comments may be a little off. I said, "I believe that the second generation logo started in the 20's or 30's. I think that the 1890's and early 1900's were the old "8 string" saddles and had the first generation logo." Your saddle seems to refute that..., so the answer to your question is, "No..., I haven't seen any 8-string saddles with a second generation logo." As for the stirrups..., my old 8-string has metal wrapped ones too..., so they are probably original. And yes..., the old one is the only saddle with the extra strap on the pommel. Not sure that I am ready to part with any of my saddles at the prices they are going for on Ebay..., but I will keep you in mind when I do. I will go through my old emails..., occasionally I will get offers from people who want to sell saddles..., I could forward them to you if you are interested.

      Delete
  14. I have a George Lawrence saddle in excellent condition. It has the George Lawrence stamp on the back of the cantle. 14 inch seat with basket stamps. I need to have an idea of value. Can send a picture if asked.

    ReplyDelete
    Replies
    1. Well..., I haven't been keeping up lately..., but a quick check on Ebay has a nice one listed for $400. I tried checking the "completed" listings and there haven't been any others listed recently. Wish I could be more help..., but I couldn't do provide anything new to what I have already said in prior comments. Thanks for checking out the blog though.

      Delete
  15. Thank you for your write up. It is very informative and a huge help trying to identify the history of one of my father's saddles. It has the mark that you identify as the first generation but mine does not have the decorative scallop pattern around the mark. Would this still be considered a first generation makers Mark? Thanks again.

    ReplyDelete
    Replies
    1. Hey Joshua...., thanks for checking out the blog and for commenting. Very interesting..., I had not noticed any differences in those first generation logos..., but I haven't seen a whole lot of them. I would guess that maybe the scallops on my old saddle were added to the logo by the craftsman who built it..., maybe just a little personal touch of his own to identify it as his creation? I will try to keep an eye out for your keen observation..., and by the way..., is your saddle an old loop seat design? That would indicate that it is older than my oldest saddle and could indicate that the logo was slightly changed by the company and we can add a new "generation" of logo !!!! Thanks again..., SRS

      Delete
  16. I can send you pictures if you would like. I would like to hear anything you could add to my information on the saddle. Thanks again.

    ReplyDelete
    Replies
    1. Hey Joshua..., I tried responding to the email notification that I get when new comments are posted but I guess that doesn't work. Anyway..., yes I would like to take a look at your pictures..., not sure I can provide much more info than I have already posted on the blog..., but I am willing to give it a shot. My email address is scottr@olypen.com

      Delete
  17. Hi Scott,
    You have an amazing collection of Lawrence saddles. I have a form fit ( Bear trap) that I purchased for our son to work cattle in. The saddle has the third generation logo on it. I am looking to sell it and didn’t want to do E-bay if possible. Any suggestions for me?

    Thank you,
    Tanya

    ReplyDelete
    Replies
    1. Thanks for checking out the blog Tanya, I don't have much insight to offer you on trying to sell your saddle..., but feel free to post your email here in the comments in case we have others interested in acquiring your saddle. SRS

      Delete
  18. Their expert, smooth and a la mode look makes a creative mind that these organizations are gigantic and expert and produce top notch items.logo design service

    ReplyDelete
  19. I have a 3rd gen Lawrence rifle scabbard for sale. Just posted on Seattle Craigslist and willing to drop to reasonable offer.

    ReplyDelete
  20. Hi Scott. Just found your blog again. I will be sending you photos. Thanks again. Josh

    ReplyDelete
  21. Hi Scott - I just got an old GL CO saddle that is in great shape but needs a good cleaning. Not sure anything about it and appreciate your advice !!! Will try to get it cleaned up and send some pics !! No idea about the 1st generation stuff so your advice would be helpful !!

    ReplyDelete
  22. I'm late to this party, but I just saw 2 GL Co saddles at a thrift store, first gen logos. Fairly good condition--need some love and conditioner, but grand saddles. In So Idaho if anyone is interested.

    ReplyDelete
    Replies
    1. Thanks CathyB..., there don't seem to be a lot of those first generation saddles around..., especially in good condition. I hope someone follows up..., I am pretty much "saddled up" myself :)

      Delete
  23. Do you still have this saddle collection? I don't see any recent blog entries

    ReplyDelete
  24. Yeah Hank..., I still have all these saddles..., but I have not added any to the collection since I posted this one.

    ReplyDelete
    Replies
    1. They are great. It's a cool collection. I'm looking to pick one up that is rideable

      Delete
  25. I have 3 George Lawrence saddles that predate WWII. Two of them are teen sizes. If anyone s interested, let me know. I live in Washington state. They are all in nice condition. Make an offer.

    ReplyDelete
    Replies
    1. You can reach me at tinalake333@gmail.com if interested or you want pictures.

      Delete
  26. Hello,
    please look for an email from palominopeltier. I sent some photos of a possible very early 1st Gen GL saddle. I've had it a long time, but was never able to trace any info on it until recently. I was hoping you could take a look at it and see what you think.
    Kind regards,
    Theresa Peltier

    ReplyDelete
  27. Wow! Such an informative site! Thank you! Figuring out my Lawrence is 30’s . Best saddle I’ve ever ridden

    ReplyDelete
  28. Good morning Scott. I have been searching like crazy for answers on my saddle and am hoping you can help me. This George Laurence is pure eye candy and I would love to know more about it. It is a custom saddle the initials on the back skirt in a circle are PG. it is tooled with a beautiful pattern I’ve not seen anywhere and I wand to know the value, can you help me? And can I send you pictures? Thank you Bonnie

    ReplyDelete
  29. Scott I just realized I can send pictures to your email address. I cannot wait to hear what you think and any advice you have. Bonnie

    ReplyDelete
  30. Hi I have one with a low cantle like the first dark saddle next to the lighter one but in a floral pattern with a bronc rider on the fender. Second gen. Stamp

    ReplyDelete
    Replies
    1. Scott R. here Bill..., I believe that you have a true classic..., it has been many years..., but I seem to recall that there were few of those "bronc rider" models made..., I lost some old information and catalogs in a fire a few years back..., wish I could could give you more insight about it..., but I have imparted about all the knowledge that I was able to find already on this blog.

      Delete